Die-casting aluminum Pump Shell

Die-casting aluminum Pump Shell

The pump housing is die-casted. Die-casting is a metal casting process that uses a mold cavity to apply high pressure to the molten metal.
The pump casing is an accessory on the pump body.
Product Introduce:
The pump shell acts as a support and is connected to the bracket on which the bearing is mounted

Aluminum pump housing Feature:
Light weight
Beautiful appearance
Precise size
Excellent wear and corrosion resistance
Improve pump efficiency
Long service life

Product Advantage:
1, The aluminum pump casing is made by injecting aluminum or an aluminum alloy into the mold under pressure. This process is suitable for mass production of parts and at a lower cost.
2, Aluminum castings are a process of injecting aluminum alloy under pressure, which can produce large quantities of parts at low cost, and aluminum die casting is also a process with very high resource utilization.
3, A complete cycle can vary from one second for small components to minutes for a casting of large part, making aluminum die casting the fastest technique available for producing precise aluminum & aluminum alloy parts.

Product Application:
Chemical and petroleum industry, agriculture industry, mining and metallurgy industry, electric power industry, mechanical industry and other fields
More information you can views here

Product Description:
Technology
Die casting
Product name
Pump shell
Drawing format
CAD, PDF, STP, DWG or sample
Die casting machine type
From 160T to 1250T die cast machines
Production Process
Mould making, melting, Die casting, Deburring, Drilling holes, Tapping, CNC Machining and X-ray inspection, Assembly, Packing
Surface Treatment
Polishing, Anodizing, Powder Coating etc
Die casting materials
aluminum alloy, A360, A380, A383, AlSi10Mg, AlSi9Cu3, ADC3, ADC6, ADC12, ZL104 and ZL107 or Customized
Tolerance
As customer's requested
SAND CASTING PARTS

Comments

Post a Comment

Popular posts from this blog

Causes and prevention of local pitting defects in nodular cast iron

Image
Local pitting defects of nodular cast iron parts generally appear at the concave corners of the upper surface of the casting and consist of many pits. The shape of the pit is a circular or irregular polygon, and its diameter is mostly between 1 and 3 mm. Gray oxides remain in many places on the pit wall, and graphite is not in the form of spheres but in the form of fine flakes or dots near the pits. Cause analysis (1) Molding sand There are three types of molding sand used in the  custom cast iron bench leg factory 's production, namely wet molding sand for small molding machine molding, wet molding sand for semi-automatic molding line (FBM) and self-hardening resin sand for resin sand production line. After analysis, it is found that local pitting defects mostly occur on castings produced by FBM production lines, and castings produced by small machine modeling rarely show such defects, even if they are relatively light, and such defects are found on resin sand castings. Nev...
Read more

Four Common Methods For Electroplating Of Die-Cast Aluminum Parts (Down)

Image
2. Alkaline electrolytic polishing process of aluminum: The research of alkaline polishing solution system was carried out, and the effects of corrosion inhibitor and viscosity agent on the polishing effect were compared. The alkaline solution system with good polishing effect of  die-casting aluminum parts  was successfully obtained, and it was obtained for the first time. Additives that reduce operating temperature, extend solution life, and improve polishing results. The experimental results show that adding a suitable additive to the NaOH solution can produce a good polishing effect. Exploratory experiments have also found that the surface reflectance of the aluminum material can reach 90 after DC constant pressure electrolytic polishing with a NaOH solution of glucose under certain conditions %, But due to the unstable factors in the experiment, further research is needed. The feasibility of using DC pulse electrolytic polishing method to polish aluminum under alk...
Read more

Die-casting aluminum Elbow

Die-casting aluminum Elbow In the piping system, elbow is a pipe that changes the direction of the pipe. According to the angle, there are three most commonly used 45 ° and 90 ° 180 ° , and other abnormal angle elbows such as 60 ° are also included according to engineering needs. Product Introduce: In the piping system, elbow is a pipe that changes the direction of the pipe. According to the angle, there are three most commonly used 45° and 90°180°, and other abnormal angle elbows such as 60° are also included according to engineering needs. Other names: aluminum 90 degree elbow , right angle elbow, stamping elbow, pressing elbow, mechanism elbow, welding elbow, etc. right angle elbow  Feature: Beautiful appearance and strong texture Excellent interface characteristics Easy coating High strength Good workability Acid and alkali resistant, heat-resistant Long service life Product Advantage: Comparing to other materials, aluminum material has: 1. Al...
Read more