Aluminum Lamp Housing

Aluminum Lamp Housing

Features:
1. With high light transmittance, high diffusivity, no glare, no light;
2. The light source concealment excellent (effectively adjust diffusion rate and transmission rate, can not see light beads under the premise of the maximum transmission rate);
Product Introduce:
The lamp housing is made of die-casting aluminum alloy, it belongs to led accessory. Beautiful appearance, fully solved the problem of high-power LED heat dissipation.
It is a protective cover for better gathering of light, making the light more concentrated and reducing the damage of the light to the eyes.
We are CNC Aluminum Lamp Housing supplier
Features:
1. With high light transmittance, high diffusivity, no glare, no light;
2. The light source concealment excellent (effectively adjust diffusion rate and transmission rate, can not see light beads under the premise of the maximum transmission rate);
3. The light transmission rate of 94%;
4. With a high flame retardancy;
5. With high impact strength;
6. LED bulb is suitable for use;
7. The implementation will turn into a spherical point light source light.
Die-casting Aluminum Street Light Cover Product Details
Processing
die casting
Application
road, light, cinema, square
LED, lamp, street,house
casting process
client drawings , pattern, raw casting, machining, packing and delivery
Surface treatment
plating, anodizing powder coating, spray-paint
Material
aluminum alloy, aluminium A380, aluminum 6061
Size
available in all sizes or as customer's drawings
Standard
DIN, AISI, ASTM, BS, JIS, etc
Service
To chart to sample production; OEM / ODM
More information you can views here

Comments

Post a Comment

Popular posts from this blog

Causes and prevention of local pitting defects in nodular cast iron

Image
Local pitting defects of nodular cast iron parts generally appear at the concave corners of the upper surface of the casting and consist of many pits. The shape of the pit is a circular or irregular polygon, and its diameter is mostly between 1 and 3 mm. Gray oxides remain in many places on the pit wall, and graphite is not in the form of spheres but in the form of fine flakes or dots near the pits. Cause analysis (1) Molding sand There are three types of molding sand used in the  custom cast iron bench leg factory 's production, namely wet molding sand for small molding machine molding, wet molding sand for semi-automatic molding line (FBM) and self-hardening resin sand for resin sand production line. After analysis, it is found that local pitting defects mostly occur on castings produced by FBM production lines, and castings produced by small machine modeling rarely show such defects, even if they are relatively light, and such defects are found on resin sand castings. Nev...
Read more

Four Common Methods For Electroplating Of Die-Cast Aluminum Parts (Down)

Image
2. Alkaline electrolytic polishing process of aluminum: The research of alkaline polishing solution system was carried out, and the effects of corrosion inhibitor and viscosity agent on the polishing effect were compared. The alkaline solution system with good polishing effect of  die-casting aluminum parts  was successfully obtained, and it was obtained for the first time. Additives that reduce operating temperature, extend solution life, and improve polishing results. The experimental results show that adding a suitable additive to the NaOH solution can produce a good polishing effect. Exploratory experiments have also found that the surface reflectance of the aluminum material can reach 90 after DC constant pressure electrolytic polishing with a NaOH solution of glucose under certain conditions %, But due to the unstable factors in the experiment, further research is needed. The feasibility of using DC pulse electrolytic polishing method to polish aluminum under alk...
Read more

Die-casting aluminum Elbow

Die-casting aluminum Elbow In the piping system, elbow is a pipe that changes the direction of the pipe. According to the angle, there are three most commonly used 45 ° and 90 ° 180 ° , and other abnormal angle elbows such as 60 ° are also included according to engineering needs. Product Introduce: In the piping system, elbow is a pipe that changes the direction of the pipe. According to the angle, there are three most commonly used 45° and 90°180°, and other abnormal angle elbows such as 60° are also included according to engineering needs. Other names: aluminum 90 degree elbow , right angle elbow, stamping elbow, pressing elbow, mechanism elbow, welding elbow, etc. right angle elbow  Feature: Beautiful appearance and strong texture Excellent interface characteristics Easy coating High strength Good workability Acid and alkali resistant, heat-resistant Long service life Product Advantage: Comparing to other materials, aluminum material has: 1. Al...
Read more